Results for machine mart xtra power tec camlok clamp
Machine Mart Xtra Power-tec - Camlok Clamp
Machine Mart Xtra Power-tec - Camlok Clamp: With 125mm x 65mm reach, 6 ton pulling capacity and a slim clamp leg for working over various obstacles that can be faced during automotive bodywork pulling applications, the CamLok clamp from Power-Tec is ideal for pulling work on vehicle chassis and other areas.
Machine Mart Xtra Power-tec - G Clamp
Machine Mart Xtra Power-tec - G Clamp: This 100mm G Clamp from Power-Tec allows for dent pulling at various angles. The clamp allows for 4 ton pulls, while the 100mm opening means the clamp can operate around, over or behind damage with ease.
Machine Mart Xtra Power-tec - Pinza Clamp
Machine Mart Xtra Power-tec - Pinza Clamp: A 45mm deep Pinza Clamp from Power-tec with a 50mm wide jaw, allowing the clamp to be used over flanges and deep onto the panel for a sure, non slip grip. Boasting 6 ton in-line capacity and 2 ton right angle capacity.
Machine Mart Xtra Power-tec - Scissor Clamp
Machine Mart Xtra Power-tec - Scissor Clamp: A 50mm wide Scissor Clamp from Power-Tec with 3 ton pulling capacity. Suitable for a wide range of pulling applications.
Machine Mart Xtra Power-tec - Swivel Clamp
Machine Mart Xtra Power-tec - Swivel Clamp: With the ability to be turned 360 degrees and boasting an impressive pulling capacity of 6 tons, this swivel clamp from Power-Tec is great for various bodywork pulling applications, especially awkward ones that need to be worked on from irregular angles and positions.
Machine Mart Xtra Power-tec - 100mm Pull Clamp
Machine Mart Xtra Power-tec - 100mm Pull Clamp: Tough, durable and useful 100mm Pull Clamp from Power-Tec, great for various pulling applications. Featuring replaceable hardened steel jaws for long clamp life and 360 degree swivel yoke to avoid snagging.
Machine Mart Xtra Power-tec - Duck Bill Clamp
Machine Mart Xtra Power-tec - Duck Bill Clamp: This Duck Bill Clamp from Power-Tec is ideal for use in hard to reach areas where regular sized clamps are not able to fit. With a 30mm wide jaw, 65mm reach and 3 Ton capacity, this clamp may be slim, but it is just as capable as other clamps.
Machine Mart Xtra Power-tec - 45mm Pull Clamp
Machine Mart Xtra Power-tec - 45mm Pull Clamp: Tough, durable and useful 45mm Pull Clamp from Power-Tec, great for various pulling applications. With 5 ton pull capacity and pull yoke.
Machine Mart Xtra Power-tec - Tight Opening Clamp
Machine Mart Xtra Power-tec - Tight Opening Clamp: Ideal for use in hard to pull areas, the tight opening clamp from Power-Tec features a 38mm wide jaw and has a maximum pulling capacity of 3 tons, making it perfect for pulling applications involving areas such as chassis ends, supports and light openings.
Machine Mart Xtra Power-tec - 70mm Pull Clamp
Machine Mart Xtra Power-tec - 70mm Pull Clamp: With 70mm jaws and 5 ton pulling capacity this durable pulling clamp from Power-Tec is ideal for a wide range of automotive bodywork pulling applications and can be used on various points around a vehicle. A great time and effort saving tool.
Machine Mart Xtra Power-tec - Sill Clamps For Power-tec Carry Car
Machine Mart Xtra Power-tec - Sill Clamps For Power-tec Carry Car: Used with the Power-Tec carry car to transport vehicles around the workshop. Secures the vehicles to the carry via the sills, ideal for use on vehicles that have had their wheels and axles removed. Perfect for spray booths.
Machine Mart Xtra Power-tec - Medium Slide Hammer
Machine Mart Xtra Power-tec - Medium Slide Hammer: This medium sized slide hammer from Power-Tec is part of the Power-Tec Miracle System and is used for pushing and pulling out dents and dings from automotive bodywork. Can be used as a replacement slide hammer, or as an additional hammer to the Miracle System base package.
Machine Mart Xtra Power-tec - Weld & Pull Upgrade Kit
Machine Mart Xtra Power-tec - Weld & Pull Upgrade Kit: An easy to fit, useful attachment manufactured to convert the Power-Tec Lifadent to the Power-Tec Weld & Pull, to be used to pull out smaller dents in bodywork needing more accurate, precise attention. Easy to fit and easy to use.
Machine Mart Xtra Power-tec - Sill Clamps For Power-tec Carry Car
Machine Mart Xtra Power-tec - Sill Clamps For Power-tec Carry Car: Used with the Power-Tec carry car to transport vehicles around the workshop. Secures the vehicles to the carry via the sills, ideal for use on vehicles that have had their wheels and axles removed. Perfect for spray booths.
Machine Mart Xtra Power-tec 91635 3 Claw Strong Pull Hook
Machine Mart Xtra Power-tec 91635 3 Claw Strong Pull Hook: This hook is used to adapt the Power-Tec Miracle system to allow users to use Power-Tec's multipads glue strips, manufactured for dent removal from automotive body work using strong glue.
Machine Mart Xtra Power-tec - Tec Spot Welder
Machine Mart Xtra Power-tec - Tec Spot Welder: The Power-Tec Tec-Spot Welder is a general use weld in professional bodywork repair shops and is suitable for a wide range of welding applications involving panel pulling pins, pull washers and squiggly wire. Complete with a variety of electrodes and supplied with a slide hammer and multi hook head.
Machine Mart Xtra Power-tec - Squigley Wire Electrode Kit
Machine Mart Xtra Power-tec - Squigley Wire Electrode Kit: The Squigley wire electrode kit is to for use with the Power-Tec Tec Spot kit and can be bought as a an additional electrode or as a replacement part. This is an integral part of the kit as it is used to weld the squigley wire onto the damaged body panel ready for repair.
Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit
Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit: A comprehensive tool kit for the repair of body panels all round a vehicle. Complete with everything you need to pull out and remove dents from bodywork. For use with a spot welder, mini welder or Power-Tec's Tec Spot to produce high quality results with ease, ideal for the professional bodywork mechanic.
Machine Mart Xtra Power-tec - Carry Car Trolley
Machine Mart Xtra Power-tec - Carry Car Trolley: Strong, safe and easy to use, this versatile car trolley from Power-Tec is fully adjustable and suitable for use with a wide range of vehicles of varying sizes. Mounted on four durable, heat treated castors for great mobility and complete with 2 axle fittings, two pin fittings and a pair of 150mm extensions, this trolley is especially useful for transporting accident damaged and immobile vehicles and body shells around the workshop and spray booth.
Machine Mart Xtra Power-tec - Slide Hammer For Spot Welding
Machine Mart Xtra Power-tec - Slide Hammer For Spot Welding: Part of the Power-Tec Panel Medic Repair Kit (sold separately), this 1.5kg slide hammer is manufactured for use during spot welding applications in the automotive bodywork repair industry. This an easy to use bit of kit that ensures a brilliant finish.