Results for clarke clarke cht715 multi valve spring compressor

12345Next

Clarke Clarke CHT715 Multi-Valve...

Designed to assist with the service and repair of multi-valve petrol and diesel engines with deep seated valves. This universal model features unique dual cam action, parallel lift and automatic locking.



Click For Info
Clarke Clarke CHT461 OHC Valve S...

Suitable for service/repair work on small to medium sized OHC engines as well as for general use on OHV and CVH models.



Click For Info
Clarke Clarke CHT461 OHC Valve S...

Suitable for service/repair work on small to medium sized OHC engines as well as for general use on OHV and CVH models.



Click For Info
Clarke Clarke CHT224 3piece Coil...

Essential for the safe refurbishment of vehicle suspension units. Enables operators to have full control over compression and decompression of the coiled spring.



Click For Info
Clarke Clarke CHT224 3piece Coil...

Essential for the safe refurbishment of vehicle suspension units. Enables operators to have full control over compression and decompression of the coiled spring.



Click For Info
Clarke Clarke SSC1000 1Tonne Str...

A hydraulically powered, foot control operated device deigned for the safe dis-assembly of car and van suspension struts. Using the SSC1000 is much, much easier, and more convenient, than using a more conventional manually operated device. It means less hard work too.



Click For Info
Sealey VS150 Valve Spring Compre...

Sealey-Valve-Spring-Compressor-Ford-CVH-Sealey-VS150-Permits-valve-stem-seal-and-valve-spring-replacement-without-the-need-to-remove-the-cylinder-head-Superior-cast-design-with-radiused-fulcrum-for-smooth-spring-compression-Suitable-for-CVH-Ford-engines-1-3-1-4-and-1-6-as-fitted-to-Escort-inc-XR3i-a...



Click For Info
Sealey VS160 Valve Spring Compre...

Sealey-VS160-Valve-Spring-Compressor-OHV-Sealey-VS160-Permits-valve-springs-and-valve-stem-oil-seals-to-be-replaced-without-the-need-to-remove-the-cylinder-head-when-used-in-conjunction-with-VS1601-compressed-air-adaptor-Reversible-jaw-adaptor-and-automatic-cam-action-lock-to-pre-set-spring-tension-...



Click For Info
Sealey VS168 Valve Spring Compre...

Sealey-Valve-Spring-Compressor-Lever-Type-OHV-OHC-Sealey-VS168-Suitable-for-the-replacement-of-valve-springs-and-valve-stem-oil-seals-without-the-need-to-remove-the-cylinder-head-Use-in-conjunction-with-VS1601-compressed-air-adaptor-Adjustable-handle-claws-and-hooks-allow-use-on-most-OHV-engines-Not...



Click For Info
Sealey VS152 Valve Spring Compre...

Sealey-VS152-Valve-Spring-Compressor-OHV-Sealey-VS152-Suitable-for-most-small-and-medium-sized-OHV-engines-Fully-adjustable-jaw-with-75-165mm-capacity-and-150mm-throat-depth-Parallel-lift-action-with-automatic-lock-Sealey-VS152-Valve-Spring-Compressor-Ohv



Click For Info
Sealey VS153 Valve Spring Compre...

Sealey-Valve-Spring-Compressor-OHC-OHV-CVH-Sealey-VS153-Suitable-for-most-small-and-medium-sized-OHC-engines-and-also-for-general-use-on-OHV-and-CVH-engines-Universal-jaw-with-60-155mm-capacity-and-160mm-throat-depth-Parallel-lift-action-with-automatic-lock-Sealey-VS153-Valve-Spring-Compressor-Ohc-o...



Click For Info
Sealey VS1814 Motorcycle Valve S...

Sealey-Motorcycle-Valve-Spring-Compressor-Sealey-VS1814-Suitable-for-most-motorcycle-engines-Features-two-sizes-of-threaded-adjusters-for-increased-applications-and-three-sizes-of-interchangeable-jaws-Ø25-125mm-Capacity-and-100mm-throat-depth-Supplied-in-carry-case-Sealey-VS1814-Motorcycle-Valve-...



Click For Info
Machine Mart Xtra Draper 55-175m...

The Draper 55-175mm Universal Valve Spring Compressor has plastic coated locking handles to keep valve springs positively compressed during work. It is suitable for use on most engines due to the double-ended valve cup. The Unique double action lever cams provide choice of operation either above or...



Click For Info
Draper Draper Expert Valve Sprin...

This expert quality Valve spring compressor from Draper has a robust plastic coasted locking handle. When the tool is locked on it keeps valve springs positively compressed during maintenance work. It has a throat depth of 160mm.



Click For Info
Clarke Clarke JumpStart® 910 ...

The Clarke Jumpstart 910 provides vital standby or emergency power for the home, vehicle, business or boat. With its built in air compressor it is also ideal for general leisure use. Take this compact multi purpose energy pack anywhere to provide instant starting, lighting, or power for many...



Click For Info
Machine Mart Xtra Laser 5272 - M...

Suitable for a wide range of vehicles with smaller engines, this valve spring compressor set is ideal for use with vehicles such as quad bikes and motorbikes.



Click For Info
Laser Laser 2609 Valve Spring Co...

Suitable for Multi-Valve, Zetec engines. Large throat clearance for larger engines .



Click For Info
Machine Mart Xtra Laser 2609 Val...

Suitable for Multi-Valve, Zetec engines. Large throat clearance for larger engines .



Click For Info
VS150 Valve Spring Compressor - ...

Permits valve stem seal and valve spring replacement without the need to remove the cylinder head. Superior cast design with radiused fulcrum for smooth spring compression. Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo), Fiesta (inc. RS Turbo) and Orion.



Click For Info
VS150 Valve Spring Compressor - ...

Permits valve stem seal and valve spring replacement without the need to remove the cylinder head. Superior cast design with radiused fulcrum for smooth spring compression. Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo), Fiesta (inc. RS Turbo) and Orion.



Click For Info
VS160 Valve Spring Compressor OH...

Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 compressed air adaptor. Reversible jaw adaptor and automatic cam action lock to pre-set spring tension. Suitable for use on a wide range of OHV, OHC and...



Click For Info
VS160 Valve Spring Compressor OH...

Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 compressed air adaptor. Reversible jaw adaptor and automatic cam action lock to pre-set spring tension. Suitable for use on a wide range of OHV, OHC and...



Click For Info
Laser Laser 5495 Valve Spring Co...

This engine valve spring removal kit, can be used with the cylinder head in place if compressed air is used to keep the valves shut. Suitable for use with a wide range of engines from various manufacturers.



Click For Info
VS168 Valve Spring Compressor Le...

Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.



Click For Info
VS168 Valve Spring Compressor Le...

Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.



Click For Info
Laser Laser 5258 - Valve Spring ...

A comprehensive set designed to allow the removal of valve springs and valve stem oil seals with the cylinder head in place, reducing the time and effort required to complete the job.



Click For Info
Machine Mart Xtra Laser 3523 Val...

Suitable for large diesel and petrol engines. Unique Direct Action compressor lever give improved visibility and ease of use in confined areas. Collet release adaptors 25mm and 30mm. Jaw opening Min 35mm Max 142mm. Throat clearance: 150mm



Click For Info
Clarke Clarke Shhh Air 150/100 C...

SUPER QUIET! Virtually Silent Air CompressorWhere low, or very low noise levels are desired then this virtually silent in operation air compressor is an absolutely ideal choice! It also offers high performance and plus portability too. All these great features means the 'Shhh Air 150/100' is a...



Click For Info
Valve Spring Compressor

Expert Quality Variable assembly design allows use of this tool on most cylinder heads including motorcycles, small plant machinery and marine engines Includes five valve cups pressure winding handle and accessories Capacity: 180mm Throat depth 110mm



Click For Info
Clarke Clarke Champ 2.4ltr Air C...

A tough, highly portable compressor for jobs in the hire and building trade. Handy for on-site tasks involving fixing, spraying, inflating and dust/debris blowing. Easy to carry, protective steel frame.



Click For Info
Clarke Clarke CMFT250 Multi Tool...

Ideal for DIY use, the Clarke CMFT250 Multi Function Tool is great for sawing, cutting, sanding, polishing, chiselling and various other applications. Featuring variable speeds, 3.8mm stroke length, oscillating action and complete with a sanding pad, 3 sanding sheets, 2 cutting blades, scraper...



Click For Info
VS152 Valve Spring Compressor OH...

Suitable for most small and medium sized OHV engines. Fully adjustable jaw with 75-165mm capacity and 150mm throat depth. Parallel lift action with automatic lock.



Click For Info
VS153 Valve Spring Compressor OH...

Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock.



Click For Info
VS153 Valve Spring Compressor OH...

Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock.



Click For Info
VS152 Valve Spring Compressor OH...

Suitable for most small and medium sized OHV engines. Fully adjustable jaw with 75-165mm capacity and 150mm throat depth. Parallel lift action with automatic lock.



Click For Info
Clarke Clarke JumpStart® 1010...

Suitable for home, garage or roadside application, the lightweight, compact and portable Jump Start 1010 is suitable for use with a wide range of vehicles, Capable of Jump starting petrol and diesel engines of up to 3 litres, the Jump Start 1010 is ideal for starting vehicles that have stood for a...



Click For Info
Clarke Clarke ET133 3 Piece Spri...

A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered.



Click For Info
Clarke Clarke ET153 - 3 Piece Sp...

A trio of popular engineers measuring instruments, precision made from fine quality steel to ensure accuracy.



Click For Info
Clarke Clarke CHT394 - 200 Piece...

A comprehensive assortment of compression and expansion springs to suit numerous repair, building and development projects. A good chance you\'ll find the one you need.



Click For Info
Clarke Clarke CMV140 Multi-Purpo...

This ingenious three point bench-mounting vice is ideal for mechanics and engineers. Constructed of robust cast iron offering many features including 360° swivel and jaws which can be pivoted 180° either side of vertical. This vice provides a secure grip and firm hold.



Click For Info

12345Next